Read the What's
New page for the latest updates.
The new FAQ (Frequently asked
questions) section is under construction.
If you would like to create a link to this site,
follow the directions on this page. Link 2 Us
Progress has been slow on my new buggy engine,
but I've put together a lot of information on how to
install a Turbocharger and Fuel Injection.
|
|
| |
Top : Tech Tips : Steering
Links:
Steering, Front Suspension and Home Laser Alignment
- Eugene Blanchard's 54 Canadian Pontiac Chieftan Steering and Front Suspension As I proceeded through this project, I had a number of choices that I could of taken for the front suspension: Rebuild the kingpin suspension My...
(Added: 22-Aug-2001 Hits: 2905 )
|
Straighten Up and Fly Right
- Straighten Up and Fly Right Using an Alignment System to Get Your Car Handling at It's Full Potential By Joe Martin
(Added: 22-Aug-2001 Hits: 1666 )
|
Tech Info on Rack and Pinions
- Rack and Pinion Installation and Front End Geometry --------How and where to bolt in the rack and pinion --------How to make your race car...
(Added: 25-Feb-2002 Hits: 4016 )
|
Tips for homebrew alignment tools:
- Camber. With some trigonometry involved, this is the simplest tool to make. You basically use two rulers and a level indicator. Position one ruler parallel to the rim and the other perpendicular with respect to earth and then measure the distance between the two tips. Calculate angle. Remember SOH CAH TOA?...
(Added: 22-Aug-2001 Hits: 1872 )
|
Do-It-Yourself Alignment
- I received a lot of interest from fellow British Car owners when I mentioned doing my own alignemnts with homemade tools, so I took a couple of days and put together this explination of how I do it, and what tools I use. If everyone understands this, then I'll give horror stories of aligning a Spec Racer (Sports Renault) or Formula Car.
(Added: 10-Oct-2001 Hits: 1980 )
|
Pages Updated On: 5-Apr-2008 - 01:02:40
|
